Konica Minolta bizhub C35 - Manual (Page 116)

[Admin Settings] 3-69
[Folder Settings]
"
All factory default values are shown in bold.
[Main Scan Adjust] Adjust the scanning settings.
[Main Scan Page] Settings [Print] / [Cancel]
Print the test pattern for fine adjustment of the
color ratios in the main scanning direction.
[Scan Adjust Value] Specify color adjustments for yellow, magenta
and cyan.
[Yellow] Settings -42 to 42 (Default: 0)
Finely adjust the ratio of yellow in the main
scanning direction.
[Magenta] Settings -42 to 42 (Default: 0)
Finely adjust the ratio of magenta in the main
scanning direction.
[Cyan] Settings -42 to 42 (Default: 0)
Finely adjust the ratio of cyan in the main scan-
ning direction.
[Supplies] Reset the service life counters for various con-
sumables.
[Consumables Replace]
[Transfer Belt Unit] Settings [Yes] / [No]
Reset the transfer belt counter.
[Transfer Roller
Unit] Settings [Yes] / [No]
Reset the transfer roller counter.
[Fusing Unit] Settings [Yes] / [No]
Reset the fuser unit counter.
Item Description
[Auto Del Interval] Settings [Erase Disabled] / [12 Hours] / [1
Day] / [2 Days] / [3 Days] / [7 Days]
/ [30 Days]
Select the periodic time interval to automati-
cally delete all files saved on the hard disk
using the Scan to HDD function.