Konica Minolta bizhub C35 - Manual (Page 247)

Specifying destinations 10-32
With [Web Service Settings]
With a Web Service transmission, scan data can be sent to a previously reg-
istered network computer.
Network computers where this machine is registered as a Web Service scan-
ner appear as destinations. Select a destination.
1
In the initial Scan to Folder mode screen, press [Direct Input].
2
Press [Web Service Settings].
3
Select the destination.
– If the desired destination is not displayed, press [Search], and then
type in the destination name to be searched for.
"
If [Admin Settings] - [Security Settings] - [Security Details] - [Manual
Destination Input] is set to [Restrict], an address cannot be directly
typed in. For details on [Manual Destination Input], refer to “[Security
Settings]” on page 3-70.
"
With a Web Service transmission, only one destination can be speci-
fied.
"
With WSD scanning on Windows Server 2008 R2/7/Vista/Server
2008, it may not be possible to specify a resolution or document size.
Selecting from the log
A destination can be selected from the log of the last five transmissions.
1
In the initial Scan to Folder mode screen, press [Log].
2
Select the destination from the list, and then press the [Start] key.
"
Only one destination can be selected from the log.
"
The only destinations that appear in the log are those specified after
pressing [Direct Input].
In addition, destinations specified with broadcast transmissions do not
appear in the log.
"
When the machine is turned off, the log is cleared.
"
If [Admin Settings] - [Security Settings] - [Security Details] - [Disable
Job History Display] is set to [ON], a destination cannot be selected
from the log.