Konica Minolta bizhub PRESS 2250P User Manual
Page 58
4-4
bizhub PRESS 2250P
Main Body Specifications
4
4.1
*: The machine may not be adaptable to some range in the temperature lower than 20° (68°F ) and under 20%
of humidity.
Either JIS or ISO standard sizes are used for B series by default depending on the area. For JIS/ISO switch-
ing, please contact your service representative.
Foolscap refers to 8 e 13 w, 8.12 e 13.2 w, 8.25 e 13 w, or 8.5 e 13 w.
Wide Paper varies in dimensions even though having the same size name. Be sure to check and enter actual
dimensions of the wide paper to be used.
Paper size
Standard: 12 × 18 w, 11 × 17 w, 8.5 × 14 w, 8.5 × 11 w/v,
9 × 11 v, 5.5 e 8.5 v, SRA3 w, A3 w, B4 w, SRA4 w, A4 w/v,
B5 w/v, A5 v, Foolscap
Available to specify the detectable standard sizes for each
tray in the Tray Setting which provides the following options:
•
A5 v or 5.5 × 8.5 v
•
SRA3 w or 12 × 18 w
•
8 × 13 w, 8.12 × 13.2 w, 8.25 × 13 w, 8.5 × 13 w or
8.5 × 14 w
Custom: min. 7.17" × 5.47" (182 mm × 139 mm) to max.
12.76" × 18.23" (324 mm × 463 mm)
Wide Paper: 12 × 18W w, 11 × 17W w, 8.5 × 11W w/v,
5.5 × 8.5W v, A3W w, B4W w, A4W w/v, B5W w/v, A5W v
Tab Paper: 11 × 17T w, 8.5 × 11T w/v, 5.5 × 8.5T v, A3T w,
B4T w, A4T w/v, B5T w/v
Image loss
Leading: 3 mm or less
Trailing, right, and left edges: 2 mm or less
Feeding capacity
Trays 1, 2; 1,500 sheets (21 lb Bond/80 g/m
2
)
Warm-up time
Approx. 460 seconds or less (20°C, 50% RH, 230 V)
First-page printing time
2.8 seconds or less (8.5 × 11 v, A4 v)
Power requirements
Metric area: AC 220 V to 240 V e 2/ 25 A, 50 Hz/60Hz
Inch area: AC 208 V to 240 V e 2/24 A, 60 Hz
Power consumption
Metric area: 12.00 KW or less (Paper Feeder Unit PF-703 e
3 + Main Body 2 + Relay Unit RU-510 + Tandem Unit TD-
501 + Main Body 1 + Large Capacity Post Inserter PI-PFU
+ Relay Unit RU-509 (+ Humidifier HM-102) + Relay Unit
RU-510 + Folding Unit FD-503 + Saddle Stitcher SD-506
+ Perfect Binder PB-503 + Finisher FS-532)
Inch area: 11.52 KW or less (Paper Feeder Unit PF-703 e 3
+ Main Body 2 + Relay Unit RU-510 + Tandem Unit TD-501
+ Main Body 1 + Large Capacity Post Inserter PI-PFU +
Relay Unit RU-509 (+ Humidifier HM-102) + Relay Unit
RU-510 + Folding Unit FD-503 + Saddle Stitcher SD-506
+ Perfect Binder PB-503 + Finisher FS-532)
Weight
1693.15 lb (768 kg) (Main Body 2 + RU-510 + TD-501 + Main
Body 1)
Dimensions
•
Main body (Main Body 2 + RU-510 + TD-501 + Main
Body 1):
110.83 (W) e 35.83 (D)*1 e 48.58 (H)*2 inches
(2,815 (W) e 910 (D)*1 e 1,234 (H)*2 mm)
•
Main body + Paper Feeder Unit PF-703 + Relay Unit
RU-510 + Large Capacity Stacker LS-505 + Finisher
FS-532:
214.57 (W) e 35.83 (D)*1 e 57.24 (H)*3 inches
(5,450 (W) e 910 (D)*1 e 1,454 (H)*3 mm)
*1: Including a rear duct
*2: Excluding the control panel
*3: Including the control panel
Space requirements (Space required for
the safe operation)
7.87 inches (200 mm) or more from the back (back side of
the duct); 3.94 inches (100 mm) or more from both right and
left sides
Operating temperature
10°C (50°F) to 30°C (86°F)*
Humidity
10% to 80%*
Specifications