7 using machine when power save led lights, 1 operation to enable the machine, Using machine when power save led lights -26 – Konica Minolta bizhub PRESS 2250P User Manual
Page 34: Operation to enable the machine -26
2-26
bizhub PRESS 2250P
Using Machine When Power Save LED Lights
2
2.7
2.7
Using Machine When Power Save LED Lights
If you find the Power Save LED lit, the machine is inactive due to the Power Save or Weekly Timer function.
You cannot operate the machine with either of the functions activated.
2.7.1
Operation to Enable the Machine
%
Press any key on the control panel.
% If the machine makes no response with any key pressed on
the control panel, press Power Save.
If Power Save has been activated, the machine will be ready for printing.
If Weekly Timer has been activated, the Machine Screen will be displayed with the message [Timer interrupt
mode / Please enter password] in the message area. Entering the password allows you to use the machine
temporarily.
d
Reference
The Power Save function has two modes: Auto Low Power and Auto Shut OFF. For details, see the following
description.
Power Save can also be activated manually. See page 2-28 for details.