Konica Minolta bizhub PRESS 2250P - Manual (Page 27)

bizhub PRESS 2250P 2-19
2.5 Turning On/Off the Power 2
2.5.2 Turning Off the Power
NOTICE
Be sure not to turn off/on the
main power switch; the main power switch should normally be kept turned on.
Be sure not to turn off the main power switch on Main Body 1 or Main Body 2 before turning off the sub
power switch.
Be sure not to turn off the main power switch while the following messages are displayed after turning off
the sub power switch.
[Cooling in progress / After cooling, power off automatically]
[Power off in progress / Please do not turn the main power off]
Turning off the main power switch with these messages displayed may cause machine trouble such as toner
fixation.
When turning the
main power switch off then on, be sure to wait 10 seconds or longer before turning the
main power switch on again. If the main power switch is turned on again within 10 seconds, the machine
may not operate properly.
1
Turn OFF the sub power switch.
The sub power switch is located on the front of Main Body 1.
The touch panel and all the LEDs on the control panel other
than the Power LED will go out, and the Power LED will turn red
from green.
% When the machine is under control of the Weekly Timer func-
tion, do not turn off the sub power switch. Turning off the
sub power switch will deactivate the Weekly Timer function.
2
Turn OFF the main power switch on both Main Body 1 and
Main Body 2.
Each of the main power switch is located inside Main Body 1
and Main Body 2.
It can be reached by first opening the front door, then the left
side door of the main body.
ON
OFF
ON
OFF