Konica Minolta bizhub PRESS 2250P - Manual (Page 32)

2-24 bizhub PRESS 2250P
Turning On/Off the Power 2 2.5
When the job cannot be continued the next day but still needs to be contin-
ued the next day
If the message notifying that the job cannot be continued the next day is displayed but the output process
still needs to be continued, you may be able to store the output data and continue the job the next day.
1
To do so, press the [Print a Set] key in the dialog displayed after pressing Stop on the control panel,
if applicable.
When printing the set is completed and the machine stops, the [Print a Set] key will disappear from the
dialog.
2
Turn off the sub power switch.
3
See page 2-21 for the procedure to follow.