Konica Minolta bizhub PRESS 2250P - Manual (Page 36)

2-28 bizhub PRESS 2250P
Using Machine When Power Save LED Lights 2 2.7
2.7.4 Manually Conserving Energy
Follow the procedure below to operate Power Save function (Low Power or Shut OFF) manually.
1
Hold down Power Save on the control panel for over a second.
The following message will be displayed.
Using Shut OFF mode:
[Enters Shut OFF in 10 seconds / Press any hard key to cancel]
Using Low Power mode:
[Enters Low Power in 10 seconds / Press any hard key to cancel]
2
Power Save will be activated.
The Power Save LED lights and the touch panel goes off.
Be sure to hold down Power Save on the control panel for over a second, otherwise Power Save will
not be activated with the following message displayed.
[Keep [Power Save] pressed more than one second to enter auto shut off]
[Keep [Power Save] pressed more than one second to enter auto low power]
d
Reference
The machine is initially set to activate the Shut OFF mode manually. The Utility Menu Screen allows you to
manually activate the Low Power mode instead.