4 continuing the job the next day, Continuing the job the next day -21 – Konica Minolta bizhub PRESS 2250P User Manual
Page 29
bizhub PRESS 2250P
2-21
2.5
Turning On/Off the Power
2
2.5.4
Continuing the Job the Next Day
If the sub power switch is turned off while there is a print job in progress or a reserved/suspended job, one
of the following two messages is displayed.
-
When the job can be continued the next day: [Reserved/Suspended job is left / If power turned off now,
that job cannot be output]
-
When the job cannot be continued the next day: [Cannot be continued next day in this condition / To
continue with output, turn on the power]
Perform an operation according to the message displayed.
When the job can be continued the next day and will be continued
1
To save the reserved/suspended job on the HDD of the main body, press [OFF After Storing Data].
2
The sub power switch will be turned off automatically after the data storing process is completed.
When the sub power switch is turned on again, the data can be read from HDD to be output.
% To turn off the sub power without storing the data, press [Cancel Job] on the screen. The data stor-
ing process will be canceled and the sub power will be turned off. The job cannot be output again.