Konica Minolta ScanDiva - Manual (Page 96)

ScanDIVA User’s Guide
6-2
1 Maintenance
The following daily checks and cleaning are required to ensure the best possible performance and
proper operation of the Scanner.
1.1 Daily checks
1 Any of the following conditions could damage the Scanner or other electrical
equipment.
Move the Scanner immediately and eliminate the possible cause of
malfunction.
• The Scanner is placed on the power cord or other cables.
• The Scanner is placed on any cord of other electrical devices.
2 If the following condition is found turn the Scanner OFF immediately, unplug
the power cord from the outlet, and call your local authorized dealer.
• The power cord or USB Cable is damaged.
1.2 Cleaning
Protective glass
Dust or dirt on the protective glass can prevent the document from being scanned
correctly. Remove dirt from the glass by wiping the glass surface with a dry soft
cloth.
Book table cover・Glass plate unit (option)
Wipe the book table cover and Glass Plate Unit with a dry soft cloth to remove any
dust or dirt from the glass.
Protective glass
Protective glass
Book table cover
Glass plate unit