Konica Minolta ScanDiva - Manual (Page 12)

x
Introduction
Thank you for choosing our Book Scanner (herein after referred to as “the Scanner”).
This operator’s manual includes precautions for installation/operation of the Scanner, a system outline,
an explanation of the Driver software, operation procedures for the Scanner, troubleshooting tips,
maintenance, and product specifications.
To ensure the best performance and effective use of your unit, read this manual carefully until you
familiarize yourself thoroughly with the unit's operation and features.
Please keep this manual and use it as a quick and handy reference tool for immediately clarifying any
questions that may arise.
Please also note the following precautions.
All Areas
Use the USB Cable supplied with the equipment. Use of an unshielded cable invites radio frequency
interference.
Always refer to this manual when operating the Scanner and do not attempt to touch the Scanner parts
for which no explanations are given in the text.
NEVER attempt to disassemble or modify the Scanner, as it is very dangerous.
Call your authorized dealer when you want to move the Scanner, which has been installed.
FCC Part 15 - Radio Frequency Devices (For U.S.A. Users)
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired
operation.
WARNING
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at their own expense.
The design and production of this unit conform to FCC regulations, and any changes or modifications
must be registered with the FCC and are subject to FCC control. Any changes made by the purchaser
or user without first contacting the manufacturer will be subject to penalty under FCC regulations.