Konica Minolta ScanDiva - Manual (Page 48)

ScanDIVA User’s Guide
3-18
2 Place the “White Paper” on the Adjustment Plate as shown below with the
white surface facing the front.
If the Glass Plate Unit has been attached, close the Glass Plate Unit, and place the
“White Paper” on the glass.
3 Select “6. White Shading” on the pull-down list under “Detail & Adjustment”,
and then click “Run”.
4 Click “OK” on the confirmation screen to confirm the inability of User
Account Control during the adjustment.
5 The window indicating that adjustment is underway will appear. When the
window disappears, the adjustment is completed. Proceed to the next
adjustment, “2.8 White Balance”.
Adjust the edge of
the paper to the
inside of the outer
cover
Glass
White Paper
Adjustment Plate
Cradle