Konica Minolta ScanDiva - Manual (Page 46)

ScanDIVA User’s Guide
3-16
2.6 Black Shading
This adjustment is to read the fundamental data to calibrate the black shading level.
1 Remove the “Setup Adjustment Sheet” and the Adjustment Plate that were on
the cradle in the previous adjustment.
2 Select “5. Black Shading” on the pull-down list under “Detail & Adjustment”,
and then click “Run”.
3 Click “OK” on the confirmation screen to confirm the inability of User
Account Control during the adjustment.
4 The window indicating that adjustment is underway will appear. When the
window disappears, the adjustment is completed. Proceed to the next
adjustment, “2.7 White Shading”.