Konica Minolta ScanDiva - Manual (Page 32)

ScanDIVA User’s Guide
3-2
1 ScanDIVA TWAIN Driver Setup
The ScanDIVA TWAIN Driver hereinafter referred to as “the Driver” must be installed on the Personal
Computer connected to the Scanner to read images from it via TWAIN scanning. This chapter
describes the system requirements of the Personal Computer and the installation procedure of the
Driver.
1.1 Trademark Acknowledgments
IBM and IBM PC/AT are registered trademarks of International Business Machines
Corporation.
Microsoft, Windows, Windows XP, Windows Vista and Windows 7 are registered trademarks of
Microsoft Corporation.
All other brand or product names are trademarks or registered trademarks of their respective
companies or organizations
1.2 System Environment
The following are the minimum system requirements for the computer connected to the Scanner
to install the Driver. The operator should be completely familiar with basic Windows operations.
Computer Compatible with IBM PC/AT
OS Windows 7: 32 bit, 64 bit
Windows Vista: 32 bit, 64 bit SP2 or later
Windows XP: 32 bit SP3 or later
CPU INTEL Core i7 or greater
Memory 4 GB or greater
Hard disk drive 2 GB of available hard disk space
Interface Hi-Speed USB 2.0
Optical disc drive CD-ROM drive
Display Display that has a screen resolution of 1,280 x 1,024 or
greater
Application software Application software compatible with TWAIN32
Recommended System Requirements
CPU INTEL Core i7 2.93 GHz or faster
Memory 4 GB or greater
Hard disk drive SATA 3 7200 rpm or greater
Video Card GeForce GT430 1 GB or greater
Display Display that has a screen resolution of 1,920 x 1,080