Konica Minolta bizhub C3850 - Manual (Page 76)

[Maintenance/Troubleshooting] 4-18
4.8 Major messages and actions 4
[Memory Overflow] Data has been received over the
maximum memory size. Cancel the job to reduce the amount
of data, then execute the job again.
All the available space in memo-
ry has been used up by docu-
ment scanning. Reduce the amount of original data.
[Stored Job Error] The option configuration is dif-
ferent from that specified when a
job was saved. Return to the option configuration
specified when a job was saved.
[HDD Capacity Over] The HDD capacity has become
full. Delete data saved on the HDD, if
necessary.
[Document Registration
Overload] The number of files on the HDD
has reached the upper limit. Delete data saved on the HDD, if
necessary.
[Memory Full (FAX)] The fax data storage area has
become full. When sending fax data, send only
the scanned original, or manually
send it again.
When receiving fax data, print or de-
lete data saved in memory.
[ADF Initialize Error] The ADF cover is not set secure-
ly. Open the ADF cover once, then
close it again.
[Check Scanner Lock Lever] The Scanner Lock Lever is
locked. Cancel the job, then release the
Scanner Lock Lever.
[Job Registration Limit Over] The number of registered jobs
has reached the upper limit. Wait until a job has been completed,
or delete a current job.
[Connection Failed] Failed to connect to the FTP
server. Check that the destination has been
registered correctly.
[Writing Error] An error has occurred while sav-
ing data onto a USB memory de-
vice. Cancel the job, then check that the
USB memory is in the write enable
state.
[Matching paper size not
available.] Paper appropriate for a print job
is not loaded in the tray. Load the appropriate paper in the
tray, then specify the correct size
and type for the loaded paper on the
Control Panel.
[Out of the Range of Auto
Zoom] The auto zoom ratio setting ex-
ceeds the allowable range. Specify the zoom ratio between 25
and 400%.
[Place Original on Glass] The original of an invalid size is
loaded on the ADF. Scan the original from the Original
Glass.
[Place Original on ADF] No original is loaded on the ADF. Load the original on the ADF.
Scan the original of different sizes
from the ADF.
[Duplex Copy Disabled] The size of the loaded paper is
not available for 2-sided copy. Cancel 2-sided copy, or change the
paper size.
[Scan TX Failed] Scan transmission has failed. After a while, cancel the job.
[Off-Hook] The handset remains picked up
after a manual transmission. Replace the handset.
[Fax TX Failed] Fax transmission has failed. This error is remedied automatically.
[Fax RX Failed] Fax receiving has failed. This error is remedied automatically.
[I-Fax TX Failed] An error occurred while sending
an Internet fax, and the job was
not ended normally. This error is remedied automatically.
[I-Fax RX Failed] An error occurred while receiving
an Internet fax, and the job was
not ended normally. This error is remedied automatically.
[I-Fax RX Data Error] The received Internet fax data is
destroyed, or it was not config-
ured in the TIFF format. This error is remedied automatically.
Message Description Remedy