Konica Minolta bizhub C3850 - Manual (Page 11)

[Maintenance/Troubleshooting] 1-8
1.2 Cleaning 1
1.2.3 Cleaning the laser lenses
This machine has four laser lenses. Follow the steps shown below to clean all the laser lenses.
0 The Laser Lens Cleaning Tool is stored in the Front Cover.
1
Open the Front Cover.
2
Take out the Laser Lens Cleaning Tool.
3
Pull out the Waste Toner Bottle as well as the Toner Cartridge and Imaging Unit of the target color.
% For information on how to remove a Toner Cartridge, refer to page 2-3. Inclining the Toner Car-
tridge may cause toner to spill.
% For information on how to remove a Waste Toner Bottle, refer to page 2-12. Inclining the Waste
Toner Bottle may cause toner to spill.
% For information on how to remove an Imaging Unit, refer to page 2-6. Cover the removed Imaging
Unit with a cloth to keep from being affected by light.