Konica Minolta bizhub C3850 - Manual (Page 24)

[Maintenance/Troubleshooting] 2-12
2.2 Replacing consumables 2
2.2.3 Replacing a Waste Toner Bottle
If the Waste Toner Bottle becomes full, this machine stops printing, and restarts printing after the Waste
Toner Bottle is replaced.
7WARNING
- Do not throw a toner container such as a toner bottle into a fire. Doing so may cause hot toner to spray
in all directions, which may cause burn injuries.
1
Open the Front Cover.
2
Press up the Waste Toner Bottle to unlock.
3
Hold the handles at the right and left of the Waste Toner Bottle, then carefully pull out the Waste Toner
Bottle.
% Inclining the Waste Toner Bottle may cause toner to spill.
4
Take a new Waste Toner Bottle out of the package box.
% Put the used Waste Toner Bottle in the plastic bag included in the package, then store it in the
package box.
% To dispose of the used Waste Toner Bottle, use the recovery service or follow the regulations in
your region.