Konica Minolta bizhub C3850 - Manual (Page 28)

[Maintenance/Troubleshooting] 2-16
2.2 Replacing consumables 2
2.2.5 Replacing the Transfer Belt Unit
After the Transfer Belt Unit replacement message has appeared, printing is possible, but the printing quality
reduces. Immediately replace the Transfer Belt.
1
Turn the power of this machine off, then disconnect the power cable and interface cable.
2
Open the Front Cover.
3
Remove all of Toner Cartridge, Waste Toner Bottle, and Imaging Unit.
% For information on how to remove a Toner Cartridge, refer to page 2-3. Inclining the Toner Car-
tridge may cause toner to spill.
% For information on how to remove a Waste Toner Bottle, refer to page 2-12. Inclining the Waste
Toner Bottle may cause toner to spill.
% For information on how to remove an Imaging Unit, refer to page 2-6. Cover the removed Imaging
Unit with a cloth to keep from being affected by light.
4
Pull the lever (1), then open the Right Door (2).
% When opening the Right Door, be sure to fold the Manual Feed Tray in advance.