Konica Minolta bizhub C3850 - Manual (Page 73)

[Maintenance/Troubleshooting] 4-15
4.7 Trouble in use of Finisher FS-P03 4
4.7 Trouble in use of Finisher FS-P03
Description of problem Check points Remedy
The Finisher does not
function. - Turn the power of this machine off and on to re-
set the Finisher.
Have you loaded paper
on which an image with-
out margins has been
printed? Paper on which an image without margins has
been printed will not be stapled because the sen-
sor cannot detect it. Do not load paper on which
an image without margins is printed.