Konica Minolta Printgroove - Manual (Page 43)

Using the Print Job Editor 4
Printgroove POD Driver 4-10
Finishing Settings
Finishing Settings has two sub-menus:
1. Paper
Binding If the checkbox is selected, the option is active. The [Binding] set-
ting for the print job appears in the drop-down menu. You may
change the selection. All available options are selectable from the
drop-down menu.
Saddle Stitch If the checkbox is selected, the option is active. You may deselect
the checkbox.
Trim If the checkbox is selected, the option is active. You may deselect
the checkbox.
Staple If the checkbox is selected, the option is active. The [Staple] setting
for the print job appears in the drop-down menu. You may change
the selection. All available options are selectable from the drop-
down menu.
Punch If the checkbox is selected, the option is active. The [Punch] setting
for the print job appears in the drop-down menu. You may change
the selection. All available options are selectable from the drop-
down menu.
Folding If the checkbox is selected, the option is active. The [Folding] set-
ting for the print job appears in the drop-down menu. You may
change the selection. All available options are selectable from the
drop-down menu.
Adhesive Binding If the checkbox is selected, the option is active.