Konica Minolta Printgroove User Manual
Page 41
Using the Print Job Editor
4
Printgroove POD Driver
4-8
Either option may be selected individually and set at any value in the support-
ed range.
Both options may be selected and their values set to 1.
Both options may be selected. One option must be set at a value of 1 and
the other option must be set at a value of 2 or higher (within the setting
range).
4. Paper Settings
Offset Output Copies
Enter the number of Offset Output Copies (1 to 9999). It is
also possible to set the value by clicking the Up/Down arrow
key displayed on the right side of the input box.
Offset Output Pages
Enter the number of Offset Output Pages (1 -to 65535). It is
also possible to set the value by clicking the Up/Down arrow
key displayed on the right side of the input box.
Output Paper Size
The selected [Output Paper Size] is listed here. All available op-
tions are selectable from the drop-down menu.
Wide Flag
If you want to enable full-bleed printing on your selected [Output
Paper Size], select the [Wide Flag] checkbox. This checkbox is
grayed out if the selected [Output Paper Size] does not support
the full-bleed option.
Paper Type
The selected [Paper Type] appears here. All available options are
selectable from the drop-down menu.
Paper Color
The selected [Paper Color] appears here. All available options
are selectable from the drop-down menu.
Paper Weight
The specified [Paper Weight] appears here. Any numeric value
between 40 and 350 g/m
2
may be entered.