Konica Minolta Printgroove - Manual (Page 13)

Installing the Printgroove POD Driver 2
Printgroove POD Driver 2-4
2.4 Installing on Windows/Mac
Though instructions for installing the Printgroove POD Driver on a Windows
or a Mac system are nearly identical, minor changes exist. The following in-
structions provide screen captures for both installs. When instructions differ,
all differences are noted.
2
Note
Before a new version of the Printgroove POD Driver can be installed, the
old version must be uninstalled.
1
Locate the Companion CD included with your Printgroove POD Queue
package.
2
Insert the CD into the CD/DVD-ROM drive of the computer upon which
you wish to install the Printgroove POD Queue client. It is an AutoPlay
CD. If the CD does not automatically launch, double-click [My Compu-
ter] then locate the drive that holds the CD. The CD’s name is [Com-
panion CD]. Right-click on the CD icon and select [AutoPlay] from the
drop-down menu. The Splash screen opens and then the Main Menu
screen is launched.
3
Click the word [Software] near the bottom of the screen. A menu
opens. Select [POD Driver]. The POD Driver screen opens. Click the [In-
stall POD Driver] button to begin the installation. The [Choose Setup
Language] screen opens:
4
Select the Setup Language from the drop-down menu then click the
[OK] button.