6 troubleshooting, 1 unable to print, Troubleshooting – Konica Minolta bizhub 222 User Manual
Page 82: Unable to print -1, 6troubleshooting
Troubleshooting
6
362/282/222
6-1
6
Troubleshooting
6.1
Unable to print
This chapter explains the troubleshooting procedures for possible malfunc-
tions.
Perform the troubleshooting procedures described below if this machine
does not print after you have sent a print job.
Symptom
Probable cause
Action
The message “No printers
are connected” or “Print
error” appears.
The printer driver selected for
printing is not compatible with
the printer controller.
Check the printer name select-
ed.
The network cable, parallel ca-
ble, or USB cable is disconnect-
ed.
Check that the cable is connect-
ed properly.
An error has occurred in this ma-
chine.
Check this machine’s control
panel.
Available memory space is not
sufficient.
Perform a test print to check
whether printing is possible.
A postscript error ap-
pears.
Available computer memory
space is not sufficient.
Perform a test print to check
whether printing is possible.
There is an error in the applica-
tion software settings.
Refer to the user’s manual of the
application software to check
the settings.
The file printing settings are in-
correct.
Change the settings and try to
print again.