Konica Minolta bizhub 222 - Manual (Page 20)

Overview 1
362/282/222 1-5
Connectable interfaces
The various interfaces that can be used to connect this printing system to a
computer are described below.
Ethernet interface
Connect when using this printing system as a network printer.
Supports 10Base-T and 100Base-TX standards. In addition, the Ethernet in-
terface supports the TCP/IP (LDP/LPR), IPX/SPX (NetWare), and AppleTalk
(EtherTalk) protocols.
Parallel interface (optional)
Connect when using this printing system as a local printer.
A computer running Windows and an IEEE 1284 parallel cable are required
for connection. Use a parallel cable that uses a terminal with an Amphenol
36-pin male connector.
The parallel interface supports the compatible, nibble, and ECP modes.
USB interface
Connect when using this printing system as a network printer.
The USB interface can be connected to a computer running Windows 2000/
XP/Vista/Server 2003/Server 2008. A USB cable is required for connection.
Use a type A (4 pin, male) or type B (4 pin, male) USB cable. A USB cable
measuring 3 meters or less is recommended.
2
Note
The USB interface cannot be connected to computers running Windows
NT 4.0 or Mac OS 9/OS X.
Web browser
(when using PageScope
Web Connection) Netscape Navigator 7.0
Item Operating environment