Konica Minolta bizhub 222 User Manual
Page 49
3
Setting up network printing
3-4
362/282/222
2
Note
Before setting up network printing, install the printer driver. For details,
refer to “Installing the printer driver” on page 2-1.
To perform network printing, change the printer port for the installed
printer driver to one for a network connection, and then change the set-
tings on this machine as necessary. For an IPP connection, it is neces-
sary to install the printer driver first.
Only the PCL printer driver can be used with Windows printing. If network
printing with the PostScript printer driver, use LPR printing or Port 9100
printing.
Network printing in a NetWare environment
NetWare version
Protocol used
Emulation
Service mode
NetWare 4.x
IPX
NDS/Bindery
Pserver/Nprinter
NetWare 5.x/6
IPX
NDS
Pserver
TCP/IP
NDPS(lpr)