Konica Minolta BIZHUB C252 - Manual (Page 71)

2 Scanning Documents
2-38 C252
Scan
nin
g
Do
cu
men
ts
Chapter 2
4
Touch [Scan Settings], and then specify the scan settings.
– For details on the scan settings, refer to “Specifying the Scan Set-
tings” on page 2-42.
5
After specifying the settings, touch [OK].
6
Load the document into the ADF (optional) or position it on the original
glass of the machine.
7
Press the [Start] key on the control panel.
The document is scanned, and the data is sent.
2
Note
Do not turn off the machine until the scanned jobs disappear from the job
list.