Konica Minolta BIZHUB C252 - Manual (Page 235)

3 Specifying Settings From the Control Panel
3-124 C252
Sp
ec
ifyin
g
Set
tin
gs
F
ro
m
th
e
Co
nt
ro
l Pa
ne
l
Chapter 3
3.31 SNMP Settings
SNMP settings can be specified.
SNMP Parameters
The SNMP parameters are as follows:
The v1/v2c settings that can be specified are described below.
Item Description
SNMP Setting Specify whether to use SNMP.
SNMP v1/v2c(IP) Select whether to use SNMP v1/v2c (IP).
SNMP v3(IP) Select whether to use SNMP v3 (IP).
SNMP v1(IPX) Select whether to use SNMP v1 (IPX).
UDP Port Number Specify the UDP port number. To change the value, press
the [C] (clear) key, and then use the keypad to type in the
value (between 1 and 65535).
[v1/v2c Setting] Specify when you want to select v1 or v2c. For details on
specifying the setting, refer to “v1/v2c Setting” on
page 3-126.
[v3 Setting] Specify when v3 is selected. For details on specifying the
setting, refer to “v3 Setting” on page 3-127.
Item Description
Write Setting Specify whether to enable the write setting.
Read Community Name Specify the read community name. The default setting is
“public”. Use the keyboard that appears in the touch panel
to type in the read community name.
Write Community Name Specify the write community name. The default setting is
“private”. Use the keyboard that appears in the touch panel
to type in the write community name.