19 search default setting, To specify the detect default server settings, Search default setting -87 – Konica Minolta BIZHUB C252 User Manual
Page 198: To specify the detect default server settings -87
Specifying Settings From the Control Panel
3
C252
3-87
Sp
ec
ifyin
g
Set
tin
gs
F
ro
m
th
e
Co
nt
ro
l Pa
ne
l
Chapter 3
3.19
Search Default Setting
You can specify the LDAP server that is to perform searches by priority from
the registered LDAP servers.
To specify the detect default server settings
1
In the Administrator Setting screen, touch [5 Network Setting].
2
In the Network Setting screen, touch [7 LDAP Setting].
3
In the LDAP Setting screen, touch [3 Search Default Setting].
The Detect Default Setting screen appears.
4
Select the LDAP server that is to perform searches by priority.
5
Touch [OK].
2
Note
To cancel changes to the setting, touch [Cancel].
To quit specifying the Utility mode setting, touch [Exit] in the sub display
area or press the [Utility/Counter] key. Otherwise, cancel the Utility mode
by touching [Close] in each screen until the screen for the Copy, Fax,
Scan or Box mode appears.