21 e-mail rx (pop) settings, E-mail rx (pop) parameters, E-mail rx (pop) settings -96 – Konica Minolta BIZHUB C252 User Manual
Page 207: E-mail rx (pop) parameters -96
3
Specifying Settings From the Control Panel
3-96
C252
Sp
ec
ifyin
g
Set
tin
gs
F
ro
m
th
e
Co
nt
ro
l Pa
ne
l
Chapter 3
3.21
E-Mail RX (POP) Settings
You can specify the settings to perform the authentication of the e-mail
sender with POP Before SMTP.
E-Mail RX (POP) Parameters
The E-Mail RX (POP) parameters are as follows:
E-Mail RX (POP) screen 1/2
E-Mail RX (POP) screen 2/2
POP Detail screen
Item
Description
E-Mail RX Setting
Specify whether to enable authentication reception.
POP Server Address
Specify the address of the POP server to be used for au-
thentication reception.
For details on specifying the settings, refer to “POP Server
Address” on page 3-99.
Login Name
Sets the login name used to connect to the POP server.
Use the keyboard that appears in the touch panel to type in
the login name (up to 63 characters).
Password
Sets the password used to connect to the POP server. Use
the keyboard that appears in the touch panel to type in the
password (up to 15 characters).
Item
Description
SSL Setting
Specify whether to use SSL in the authentication reception
time. When SSL is used, the content that is sent is encrypt-
ed.
Port Number (SSL)
Specify the port number for using SSL. To change the val-
ue, press the [C] (clear) key, and then use the keypad to
type in the value (between 1 and 65535).
Item
Description
APOP Authentication
Sets whether to turn on authentication.
Port No.
Set the port number used to communicate with the POP
server. To change the value, press the [C] (clear) key, and
then use the keypad to type in the value (between 1 and
65535).
Connection Timeout
If the operation delays while receiving the authentication
from the POP server, e-mail reception is automatically
aborted after time elapses. Set the time from the point
when the reception stops to the point when the mail
reception is to be aborted. To change the value, press the
[C] (clear) key, and then use the keypad to type in the value
(between 30 and 300 seconds).