Konica Minolta BIZHUB C252 - Manual (Page 211)

3 Specifying Settings From the Control Panel
3-100 C252
Sp
ec
ifyin
g
Set
tin
gs
F
ro
m
th
e
Co
nt
ro
l Pa
ne
l
Chapter 3
3.22 Device Settings
Device information can be set.
Device Parameters
The device parameters are as follows:
2
Reminder
When turning the main power switch OFF then ON, wait for 10 seconds
or longer before turning it ON again; otherwise the copier may not func-
tion normally.
The MAC address of this machine’s network card is displayed under
“MAC Address”.
To specify device settings
1
In the Administrator Setting screen, touch [5 Network Setting]. (Refer to
page 3-8 for more details.)
2
In the Network Setting screen, touch [9 Detail Setting].
3
In the Detail Setting screen, touch [1 Device Setting].
The Device Setting screen appears.
4
Specify the desired settings.
Item Description
Mac Address Used to verify the machine’s Mac address.
Network Speed Sets the network speed.
Be sure to turn the main power OFF and then back ON after
changing the setting.