Konica Minolta BIZHUB C252 - Manual (Page 244)

Specifying Settings From the Control Panel 3
C252 3-133
Sp
ec
ifyin
g
Set
tin
gs
F
ro
m
th
e
Co
nt
ro
l Pa
ne
l
Chapter 3
4
Touch [Fwd. →].
TCP Socket Setting screen 2/2 appears.
5
Specify the desired settings.
6
Touch [OK].
2
Note
To display the Administrator Setting screen, refer to “To display the Ad-
ministrator Setting screen” on page 3-8.
2
Note
To cancel changes to the setting, touch [Cancel].
To quit specifying the Utility mode setting, touch [Exit] in the sub display
area or press the [Utility/Counter] key. Otherwise, cancel the Utility mode
by touching [Close] in each screen until the screen for the Copy, Fax,
Scan or Box mode appears.
When a certificate is set to “Enable” on this machine, the [SSL Setting] or
[Port Number (SSL)] screen appears. To perform SSL transmission, spec-
ify the settings.
To perform external server authentication on this machine, the TCP sock-
et SSL settings are required to access this machine from the application
that is using the TCP socket.