Konica Minolta BIZHUB C252 - Manual (Page 163)

3 Specifying Settings From the Control Panel
3-52 C252
Sp
ec
ifyin
g
Set
tin
gs
F
ro
m
th
e
Co
nt
ro
l Pa
ne
l
Chapter 3
9
Specify the desired settings.
10
Touch [Fwd. →].
TCP/IP Setting screen 5/5 appears.
11
Specify the desired settings.
12
Touch [OK].
The TCP/IP settings are applied.
2
Note
To cancel changes to the setting, touch [Cancel].
To quit specifying the Utility mode setting, touch [Exit] in the sub display
area or press the [Utility/Counter] key. Otherwise, cancel the Utility mode
by touching [Close] in each screen until the screen for the Copy, Fax,
Scan or Box mode appears.
2
Reminder
In order to apply the changes made to “IP Address”, “Subnet Mask”,
“Default Gateway”, and “DHCP”, the machine must be turned off, then
on again.