Konica Minolta bizhub 282 User Manual
Page 34
Installing the fax driver
2
Fax Driver
2-14
8
Click the [Next] button.
9
In the “Printer Name or IP Address” box, enter the IP address for this
machine, and then click the [Next] button.
–
If the Additional Port Information Required dialog box appears, go
to step 10.
–
If the Finish screen appears, go to step 13.
–
If both the LPR and Port9100 settings are enabled on the machine,
the fax driver and the machine are connected by LPR.
10
Select “Custom”, and then click the [Settings] button.
11
Change the settings according to the port, and then click the [OK] but-
ton.
–
For an LPR connection, Select “LPR”, and then enter “Print” in the
“Queue name” box.
–
For a Port9100 connection, select “RAW”, and then enter the RAW
port number (9100 at default) in the “Port Number” box.
–
The information entered here is case-sensitive.
12
Click the [Next] button.
13
Click the [Finish] button.
The Add Printer Wizard appears.
14
Click the [Have Disk] button.
15
Click the [Browse] button.