Konica Minolta bizhub 282 - Manual (Page 19)

Overview 1
Fax Driver 1-5
1.3 Setting up the system
In order to use this printing system, it must first be set up.
Setup consists of connecting this machine to a computer and installing the
fax driver onto the computer being used.
!
Detail
This manual describes the setup method of network connection only for
Port9100 that will be installed by the installer, and LPR/Port9100 that will
be installed by Add Printer Wizard printing.
1.3.1 Network connection
1
Connect this machine to a computer.
2
Make sure the computer is connected to the network.
3
Specify the IP address of the machine to connect it to the network.
– For details on IP address and network settings of the machine, refer
to the User’s Guide [Print Operations].
4
Depending on the connection method and protocol, change the net-
work settings of this machine.
– LPR: Enable the LPD settings on the TCP/IP Setting screen.
– Port9100: Enable the RAW port setting on the TCP/IP Setting
screen, and specify the RAW port number (default setting is
“9100”).
– Windows printing: Enable “Windows printing” on the Windows Set-
ting screen.
– IPP: Enable IPP print on the IPP Setting screen.
5
Install the fax driver.
– Specify the network port of the fax driver according to the connec-
tion method and protocol.