Konica Minolta bizhub 282 - Manual (Page 31)

Installing the fax driver 2
Fax Driver 2-11
2.3 Installing the fax driver using the Add Printer Wizard
As an example, the following describes the installation procedure via a net-
work connection (LPR/Port9100).
When using the LPR/Port9100 printing, specify the port during the printer
driver installation process.
!
Detail
For installation procedures via other network connections (Windows
printing, IPP), refer to the User’s Guide [Print Operations].
2.3.1 Settings of this machine
Before using this machine in a network environment, the network settings
must be specified for this machine.
IP address setting for this machine
Specify the IP address of this machine.
!
Detail
For details on specifying the IP address of this machine, refer to the Us-
er’s Guide [Print Operations].
Specifying the RAW port number for this machine
To use Port9100 printing, enable the RAW port setting on the TCP/IP Setting
screen of this machine, and specify the RAW port number (default setting is
“9100”).
!
Detail
For details on specifying the RAW port number of this machine, refer to
the User’s Guide [Print Operations].
LPD setting for this machine
To use LPR printing, enable the LPD settings on the TCP/IP Setting screen
of this machine.
!
Detail
For details on LPD settings of this machine, refer to the User’s Guide
[Print Operations].