Konica Minolta bizhub PRO 1200 - Manual (Page 118)

About the network setting of this machine Chapter 6: Appendix
6-4
SMB Setting
To enable SMB setting is necessary to use the SMB printing function and the
Scan to SMB function.
1.
Touch [04 Network Settings] on the Administrator setting
menu.
2.
Touch [02 Controller NIC Setting].
3.
Touch [06 SMB Setting].
● In case of use of the SMB
printing function: Go to
Step 4 ● In case of use of the Scan
to SMB function: Go to
Step 8
4.
Touch [Enable] for [Print
Setting].
5.
Enter the NetBIOS
Name on the screen
displayed by touching
of [Change] for [Net-
BIOS Name] and touch
[OK], if necessary.
6.
Enter the Print Service
Name on the screen
displayed by touching
of [Change] for [Print
Service Name] and
touch [OK].
[Next Page] [Next Page]