Konica Minolta FK-502 - Manual (Page 50)

Before Use 2
C450 2-21
Be
fo
re
Us
e
Chapter 2
2.7.2 Operations of the PC-FAX RX feature
!
Detail
For details, see "PC-FaX RX Setting" (p. 11-50).
When setting the PC-FAX RX feature or TSI User Box Setting, documents
received are saved in the Memory RX User Box (Box No.0) or Public/Personal
User Box (Box No.1 to 999999999) in the hard disk.
The box into which documents received are saved is set in [PC-Fax RX
Setting] of the Utility Mode. For the relationship between [PC-Fax RX Setting]
and the reception method, see the table below.
[PC-Fax RX Setting] of the
Utility Mode Reception method
PC-Fax RX Setting: OFF Documents received are not saved in the box, but printed imme-
diately.
In the following cases, however, documents received are saved in
the box.
1. In the case of the Confidential RX or Relay Request RX
(When the sub-address in the F-code is representing a number
for the Confidential User Box or Relay User Box):
The reception documents are saved in the Confidential User Box
or Relay User Box regardless of the setting of the PC-FAX RX fea-
ture.
When the sub address is different from a number for each box, or
the password of the F code is different from a communication
password for each box, a communication error results.
2. When TSI User Box Setting is set to ON:
Documents received are stored in the box set by TSI User Box
Setting.
3. When the Memory RX is set to ON:
When not corresponding to 1. or 2. above, documents received
are saved in the Memory RX User Box.
PC-Fax RX Setting: ON
RX Output: Memory RX
User Box Documents received are saved in the Memory RX User Box.
In the following cases, however, documents received are saved in
a different box.
1. In the case of the Confidential RX or Relay Request RX
(When the sub-address in the F-code is representing a number for
the Confidential User Box or Relay User Box):
Documents received are saved in the Confidential User Box re-
gardless of the setting of the PC-FAX RX feature. When the sub
address is different from a number for each box, or the password
of the F code is different from a communication password for
each box, a communication error results.