Konica Minolta FK-502 User Manual
Page 169
7
Transmission Applications
7-32
C450
Tr
ansmission
Ap
plicat
ion
s
Chapter 7
3
Press [F-Code TX].
4
Enter Box No. of the receiving station in the box of SUB Address. Press
[Password] and then enter the password with keypad if necessary.
–
SUB Address and Password can be numbers of up to 20 digits.
–
When communicating with the FK-502, input 9 digits or less for the
Box No. and 8 digits or less for the Password. The required digits
are different depending on the device.
–
Numerals between 0-9, and symbols # and * can be used for
Password.
–
To correct a wrong entry, use [Del.].
–
Press [C] (clear) to clear the whole entry.
–
To release the setting, press [OFF].
If a password is needed, press YES and enter the password.
5
Press [OK].
The Comm. Setting screen will be restored.
6
Press [OK].
The FAX screen will be restored.
7
Set other functions if necessary.
–
See "Setting Transmission Conditions" on page 3-11 for
information about setting functions in the FAX screen. See