Konica Minolta FK-502 - Manual (Page 190)

Useful Functions for Reception 8
C450 8-5
Use
fu
l
F
unct
ions f
o
r Recep
tio
n
Chapter 8
8.2 Memory Reception
In the Utility Mode, you can set your FK-502 to receive documents, store
them in memory, and print them out as needed. This mode is called Memory
Reception. The following sections describe the procedures of printing and
deleting the document received and held in memory, assuming that Memory
Reception is already set up.
!
Detail
To set up for Memory Reception, see "Memory RX" on page 11-41.
8.2.1 Printing a Document Held in Memory
Printing a Document Held in Memory
Perform the following procedure to print the document received and held in
memory.
1
Press [Box] on the control panel to view the Box screen, if it is not
already displayed.
2
Select [System User Box] tab and [Memory RX User Box].
– When the User Authentication function is set to [ON], [Personal
User Box] tab is displayed.
3
Enter the password and press [OK].
– To interrupt operation, press [Cancel].
– If you press [C] (clear), the information you have entered will be
deleted.
4
Select the received document using or and press [Print].
5
Press [Start].
The designated document will print.