Konica Minolta FK-502 User Manual
Page 175
7
Transmission Applications
7-38
C450
Tr
ansmission
Ap
plicat
ion
s
Chapter 7
–
To release the setting, press [ECM OFF] again.
–
This is the screen when the optional Fax Multi Line is installed.
5
Press [Yes] when doing [Check Destination].
–
By setting [Check Destination] to [Yes], erroneous transmission can
be prevented.
6
Press [OK].
The Comm. Setting screen will be restored.
7
Press [OK].
The FAX screen will be restored.
8
Set other functions if necessary.
–
See "Setting Transmission Conditions" on page 3-11 for
information about setting functions in the FAX screen. See
"Application Functions Overview" on page 7-4 for information
about setting functions in the Fax Application Menu.
9
Designate the destination.
–
See "Selecting One Destination" on page 3-20 for designating the
destination.
10
Set the original document.
–
See "Placing the Original on the Machine" on page 3-6 for
information about setting the document.
11
Press [Start].
The FK-502 starts transmission.
!
Detail
To cancel transmission, see "Canceling Transmission" on page 3-37.
If the destination is not ready to receive, your call will be redialed. For
information about redialing, see "Recently Dialed" on page 3-29.
If transmission fails, refer to "Cannot Send Messages" on page 5-2.