Konica Minolta FK-502 - Manual (Page 166)

Transmission Applications 7
C450 7-29
Tr
ansmission
Ap
plicat
ion
s
Chapter 7
7.11 Password Transmission
Password TX
ID transmission requires that transmission be performed with a password
attached. In case the receiving facsimile with FK-502 is set to Closed
Network RX, it is necessary for the sender to send the same password as the
Closed Network RX password.
0 Specification
The use of this function is available only when the machine on the other
end is provided with the Closed Network RX (Password Transmission)
function.
0 Functions incompatible
Polling TX (Normal), Polling RX (Normal), Bulletin Board Registration,
Polling RX (Bulletin), F-Code TX
1
Press [Fax] on the control panel to view the FAX screen, if it is not
already displayed.
2
Press [Comm. Setting].
3
Press [Password TX].
4
Enter the password (Max. 20 digits) with keypad.
– Numerals of 0-9, and symbols # and * can be used for the
password.