Konica Minolta FK-502 - Manual (Page 167)

7 Transmission Applications
7-30 C450
Tr
ansmission
Ap
plicat
ion
s
Chapter 7
– To correct a wrong entry, use [Del.].
– Press [C] (clear) to clear the whole entry.
– To release the setting, press [OFF].
5
Press [OK].
The Comm. Setting screen will be restored.
6
Press [OK].
The FAX screen will be restored.
7
Set other functions if necessary.
– See "Setting Transmission Conditions" on page 3-11 for
information about setting functions in the FAX screen. See
"Application Functions Overview" on page 7-4 for information
about setting functions in the Fax application menu.
8
Designate the destination.
– See "Selecting One Destination" on page 3-20 for information
about designating the destination.
9
Set the original document.
– See "Placing the Original on the Machine" on page 3-6 for
information about setting the document.
10
Press [Start].
The FK-502 stores the document in memory before starting
transmission.
!
Detail
To cancel transmission, see "Canceling Transmission" on page 3-37.
If the destination is not ready to receive, your call will be redialed. For
information about redialing, see "Recently Dialed" on page 3-29.
If transmission fails, refer to "Cannot Send Messages" on page 5-2.