Konica Minolta FK-502 - Manual (Page 311)

11 Utility Mode
11-52 C450
Utility Mode
Ch
ap
te
r 11
5
Select [ON] for [Receive into User Box].
– The displays are different depending on the country.
– OFF: The PC-FAX RX feature is not available.
– ON: The PC-FAX RX feature is made when either of the fax
number and the PC-Fax number is received, and a
document received is stored in the specified box.
6
For [Receiving Box Destination], select a box into which a document
received by the PC-FAX RX feature is stored.
– Memory RX User Box: a received file is sent to Memory RX User
Box.
– Specified User Box: a received file is sent to a box specified by
F Code(SUB).
– When you want to stop the setting, press [Cancel].
– For the operations while in the reception of the PC-FAX RX feature,
see "Operations of the PC-FAX RX feature" (p. 2-21).
7
Set up whether or not to print the received data by [Save & Print].
8
Set up whether or not to set the [Password] by [Communication
Password].
– When setting to [ON], enter the Communication Password (8 digits
or less).
9
Press [OK] and then press [Close].
The setting is changed and you return to the Utility Mode screen.