Konica Minolta FK-502 - Manual (Page 324)

Utility Mode 11
C450 11-65
Utility Mode
Ch
ap
te
r 11
11.17 Set the Multi Lines Setting
Set the items for the additional line.
2
Note
Multi Lines Setting can be set only when the Fax Multi Line is installed.
Telephone Line Setting
Set the parameter for the additional line.
*
indicates factory default setting.
1
Open the Administrator Setting screen (See "Entering Administrator
Setting" on page 11-3).
2
Press [Fax Setting].
– Some items may not be displayed depending on the optional
settings.
Item Description Available value
Telephone Line Set-
ting Dialing Method Set the dialing method for
the Line 2 (additional line). PB
*
/ 10pps
Number of RX Call
Rings Set the arrival frequency
for the Line 2 (additional
line). Set the pseudo ring
back tone frequency after
the arrival until receiving is
started. 0-15 (2 times * )
Line Monitor Sound To hear the sound on the
line from the speaker at the
time of transmission with
the Line 2 (additional line),
set it to ON. ON / OFF
*