Konica Minolta bizhub C353P - Manual (Page 89)

C353P 4-10
Application Software 4
5
From the "Device to be backed up" pull-down menu, select this machine and then enter the 8-digit
Administrator Password registered in the machine in the "Administrator password" box.
6
Click the [Next].
? What happens if a wrong Administrator Password is entered?
% If a wrong Administrator Password is entered, a message appears saying that there is a mismatch
in the passwords. Enter the correct Administrator Password.
% If the EnhancedSecurity is set to [ON], entry of a wrong password is counted as unauthorized
access. If a wrong Administrator Password is entered a predetermined number of times (once to
three times) set by the Administrator of the machine or more, a message appears saying that the
machine accepts no more Administrator Passwords because of unauthorized access for any
subsequent entry of the Administrator Password. The machine is then set into an access lock state.
To cancel the access lock state, settings must be made by the Service Engineer; or, turn off, and
then turn on, the main power switch of the machine. If the main power switch is turned off and on,
the access lock state is canceled after the lapse of time set for [Release Time]. When the main power
switch is turned off, then on again, wait at least 10 seconds to turn it on after turning it off. If there
is no wait period between turning the main power switch off, then on again, the machine may not
function properly.
7
From "Backup media," select the check box of the desired media and click [Next].