Konica Minolta bizhub C353P - Manual (Page 33)

C353P 2-18
Administrator Operations 2
2.6 Changing the Administrator Password
When access to the Administrator of the machine from the control panel by the Admin. Settings is
authenticated, the machine enables the operation of changing the Administrator Password required for
accessing the Admin. Settings.
The Administrator Password entered for the authentication purpose appears as "*" on the display.
2.6.1 Changing the Administrator Password
2
Note
Do not leave the machine with the setting screen of Admin. Settings left shown on the display. If it is
absolutely necessary to leave the machine, be sure first to log off from the Admin. Settings.
0 For the procedure to call the Security Settings menu to the display, see steps 1 through 3 of "Setting
the EnhancedSecurity" on page 2-8 .
1
Call the Security Settings to the screen from the control panel.
2
Press the [,] key to select [Admin. Password].
3
Press the [Menu/Select] or [)] key.
4
Press the [+] and/or [,] key to enter the currently set 8-digit Administrator Password.
– Press the [*] key to delete the last character entered.