Konica Minolta bizhub C353P - Manual (Page 45)

C353P 2-30
Administrator Operations 2
2.7.5 Making Overwrite Priority Setting
2
Note
When the main power switch is turned off, then on again, wait at least 10 seconds to turn it on after
turning it off. if there is no wait period between turning the main power switch off, then on again, the
machine may not function properly.
Do not leave the machine with the setting screen of Admin. Settings left shown on the display. If it is
absolutely necessary to leave the machine, be sure first to log off from the Admin. Settings.
0 For the procedure to call the HDD Settings menu to the display, see steps 1 through 3 of "Setting the
HDD Lock Password" on page 2-21 .
1
Call the HDD Settings to the screen from the control panel.
2
Press the [,] key to select [Overwrite HDDdata].
3
Press the [Menu/Select] or [)] key.
4
Press the [+] and/or [,] key to select the Mode.
5
Press the [Menu/Select] key.
6
Press the [,] key to select [OverwritePriority].
7
Press the [Menu/Select] or [)] key.