Konica Minolta bizhub C353P - Manual (Page 65)

C353P 2-50
Administrator Operations 2
2.13 SMB Setting Function
When access to the Administrator of the machine by the System Settings is authenticated, the machine
enables setting of the NetBIOS Name.
2.13.1 Setting the NetBIOS Name
2
Note
Do not leave the machine with the setting screen of System Settings left shown on the display. If it is
absolutely necessary to leave the machine, be sure first to log off from the System Settings.
Do not leave the machine with the setting screen of Admin Mode left shown on the display. If it is
absolutely necessary to leave the machine, be sure first to log off from the Admin Mode.
0 For the procedure to call the Network Settings menu to the display, see steps 1 through 7 of "Changing
the auth-password and priv-password" on page 2-41 .
1
Call the Network Settings to the screen from the control panel.
2
Press the [,] key to select [SMB].
3
Press the [Menu/Select] or [)] key.
4
Press the [,] key to select [Print Setting].
5
Press the [Menu/Select] or [)] key.
6
Press the [,] key to select [NetBIOS Name].
7
Press the [Menu/Select] or [)] key.
8
Press the [+] and/or [,] key to enter the NetBIOS Name.
9
Press the [Menu/Select] key.
0 For the procedure to call the Network menu to the display, see steps 1 and 2 of "Changing the auth-
password and priv-password" on page 2-41 .
1
Start the PageScope Web Connection and call the Network menu to the display.
2
Click the [SMB Setting] menu.
3
Click the [Print Setting] menu.
4
Enter the NetBIOS Name in the "NetBIOS Name" box.
5
Enter the Print Service Name in the "Print Service Name" box.
6
Click the [OK].
7
Click the [OK].
8
Click the [Logout].