Konica Minolta bizhub C200 - Manual (Page 28)

Fax Driver 2-17
Installing the fax driver 2
6
Follow the on-screen instructions.
– If the User Account Control window appears, click the [Continue] button.
– If the Verify the publisher dialog box of Windows Security appears, click "Install this driver software
anyway".
7
When the installation is completed, click the [Close] button.
8
After installation is completed, make sure that the icon of the installed printer appears in the Printers
window.
9
Remove the CD-ROM from the CD-ROM drive.
This completes the fax driver installation.
2.4.3 For Windows 2000
1
After using a USB cable to connect this machine to a computer, turn on the computer.
– Do not disconnect or connect the cable while the computer is starting up.
2
Insert the printer driver CD-ROM into the computer’s CD-ROM drive.
3
Turn the main power of this machine on.
The Found New Hardware Wizard starts up.
4
Select "Search for a suitable driver for my device (recommended)", and then click the [Next] button.
5
Select "Specify location", and then click the [Next] button.
6
Specify the desired folder on the CD-ROM that contains the fax driver, and then click the [Open] button.
– Select the specified folder according to the printer driver to be used, the operating system, and the
language.
7
Click the [OK] button, and then follow the on-screen instructions.
– If digital signature warning message appears, click [Yes].
8
Click the [Finish] button.
9
When installation is complete, make sure that the icon of the installed printer appears in the Printers
window.
10
Remove the CD-ROM from the CD-ROM drive.
This completes the fax driver installation.