Konica Minolta bizhub C200 - Manual (Page 25)

Fax Driver 2-14
Installing the fax driver 2
2.3.4 For Windows 2000
2
Reminder
When installing Windows 2000, administrator permissions are required.
1
Insert the printer driver CD-ROM into the computer’s CD-ROM drive.
2
Click the [Start] button, point to "Settings", and then click "Printers".
3
Double-click the "Add Printer" icon.
The Add Printer Wizard starts up.
4
Follow the on-screen instructions.
5
In the screen for selecting the printer connection, select "Local printer".
6
Click the [Next] button.
A screen for specifying ports appears.
7
Click "Create a new port", and then select "Standard TCP/IP Port" for the type of port.
8
Click the [Next] button.
The Add Standard TCP/IP Printer Port Wizard starts.
9
Click the [Next] button.
10
In the "Printer Name or IP Address" box, enter the IP address for this machine, and then click the [Next]
button.
– If the Additional Port Information Required dialog box appears, go to step 11.
– If the Finish screen appears, go to step 14.
11
Select "Custom", and then click the [Settings] button.
12
Change the settings according to the port, and then click the [OK] button.
– For an LPR connection, Select "LPR", and then enter "Print" in the "Queue name" box.
– For a Port9100 connection, select "RAW", and then enter the RAW port number (9100 at default) in
the "Port Number" box.
– The information entered here is case-sensitive.
13
Click the [Next] button.
14
Click the [Finish] button.
The Add Printer Wizard appears.
15
Click the [Have Disk] button.