Konica Minolta magicolor 5570 - Manual (Page 85)

Configuration Menu Overview 71
"
All factory default values are shown in bold.
PAPER
SOURCE
Settings
TRAY1/TRAY2/TRAY3/TRAY4
Select the Lower Feeder Unit that is used for camera direct
printing.
"
TRAY3 and TRAY4 appear only if the optional lower
feeder units are installed.
LAYOUT
Settings
1-UP /2-UP/3-UP/4-UP/6-UP/8-UP
Specify the number of images printed on a single sheet of media.
When set to
1-UP
, only one image will be printed on a single
sheet of media.
PAPER
MARGIN
Settings
STANDARD /MINIMUM
Select the size of the media margins (area that is not printed in).
If STANDARD is selected, the standard media margin size is
specified.
If MINIMUM is selected, the media margins are reduced.
IMAGE
QUAL-
ITY
BRIGHT-
NESS
Settings
-15%/-10%/-5%/0%/+5%/+10%/
+15%
The brightness of the printed image can be
adjusted.
CONTRAST
Settings
-15%/-10%/-5%/0%/+5%/+10%/
+15%
The contrast of the image can be adjusted.
ECONOMY
PRINT
Settings
ON/OFF
Select whether to print graphics with a reduced
density by reducing the amount of toner that is used.
If ON is selected, the amount of toner used is
reduced when printing.
If OFF is selected, the amount of toner used is not
reduced when printing.
"
If GLOSSY MODE is set to ON , the amount of
toner used is not reduced when printing, even
if
ON was selected for this menu item.